Wick Trimmers and Dippers

CleanCut Candle Care Kit includes everything a candle-lover needs to keep her candles burning bright and clean. Wick Trimmer- Automatically trims wicks to the recommended ¼ inch, reducing the fire hazard and soot emissions.

Wick Dipper- Simply push the burning wick into the molten wax and pull it straight back up again to extinguish candles without smoke.

Candle Lighter- Easily lights a candle’s wick, even reaching deep inside a tall jar candle.

Candle Wipes- Quickly cleans soot from a candle’s jar to keep it fresh and clean.

Now you can find all of our candle-care products in one convenient location- opur chic Candle Care Kit. A stylish silver tin that fits in any utensil or console drawer, or sits proudly on a coffee table, houses all of our most popular candle-care products.

CleanCut® wick trimmers combine everything that is good and useful from wick trimmers of the past with new designs for convenience in a single patent pending tool. The measuring foot on the wick trimmer allows for a precise ¼" measurement of every cut you make. Unlike any other wick trimmer, our wick trimmer is guaranteed to cut any wick using our patent pending design.

*Measuring foot allows for a perfect cutting length every time

*Patent pending design fits easily into any candle

*Unique debris tray catches wick trimmings

*Durable Stainless steel construction

*Sharp blades cut precisely through any wick

CleanCut Designer Dippers showcase elegant charms on sturdy stainless steel, and a no mess, no fuss method for putting out a candle. Blowing out a candle to extinguish its flame can leave a room smelling like smoke. It may also create black residue, which can settle on walls and furniture.

Our CleanCut Wick Dipper is an easy-to-use tool that extinguishes a flame in a way that results in a cleaner, smoke-free candle. Made of stainless steel, it has a hook designed to push the burning wick into molten wax and pull it straight up again. This method of dipping the wick in wax also allows for easier relighting of the candle. And the strategically placed no-mess curve at the end of the dipper ensures no waxy residue touches tables or countertops.

CleanCut Designer Dippers are available in four distinct styles:leafy green, ocean blue, apple red or classic unadorned. Each has a chic charm with multiple glass beads that are flame retardant. It’s the perfect way to extinguish a candle – while igniting your passion for elegant home accessories.

Use CleanCut Wick Dipper to push the wick into the liquefied wax pool until the flame is completely extinguished.

Immediately pull the wick from the wax and straighten.

Allow time for the molten wax to solidify before using a CleanCut Wick Trimmer to trim the wick to ¼ inch length again.

Keep your candles out of a draft. If the flame is flickering then your candle is in a draft and it will burn unevenly and/or drip.

Keep your wicks trimmed! Trim your wick each time you relight your candle. Use a wick trimmer or pinch the sooty end off before lighing.

How long should wicks be trimmed? 1/4" is a good starting point. The candle wick in a candle is constantly feeding fuel (the wax) to the flame and a pool of wax is created around it due to the heat. The size of this wax pool can vary due to wick size, ambient air temperature and humidity, thickness of candle, how long it has been burning and other variables. Observation and common sense are your best guides.

Candles need oxygen to burn properly. If the wick is too long or contaminated it will impede the flow of oxygen and cause your candle to smoke and burn poorly. Do not allow wick debris to collect in the wax pool.

Beeswax pillar candles benefit from a bit of love and attention. For best burning results, burn pillar candles until liquid pool of wax reaches 1/4 inch from edge of candle. Keep wick in center of candle. To prevent pillar candles from boring a hole down the center, burn candles for at least one hour for each inch in diameter (i.e., burn a 3 inch diameter candle for at least 3 hours). Keep an eye on your candle! If the wax threatens to melt through the side, extinguish the candle and let it harden before relighting.

The best way to extinguish a pillar candle or votive is by tipping the wick into the wax pool using a wick dipper or other non-flammable object, then straightening the wick to let it cool. This primes the wick for the next burning and eliminates smoking. For taper candles it is best to use a candle snuffer.

Never leave a burning candle unattended! Burn candles in proper holders and on a heat-resistant surface. Do not move or touch while hot or while wax is liquid. Trim wick to 1/4 inch before burning. Protect from drafts. Keep out of reach of children. Open flame - use caution and at your own risk.